Former members

 

Alberto Vale

PhD, Engenheiro Robótica

Co-founder in 2006 and chief for R&D until 2008.

Personal page

 

Ana Isabel Alves

MSc, Aeronautical Engineer

Worked from 2012 to 2015.

 

Ana Pinto

Line inspection operator

Worked from 2013 to 2015.

Carlos Silva

PhD, Mechanical Engineer

Joined the company from 2006 to 2008 as project manager.

Personal page

Diogo Rolo

Electrical and Computer Engineer

Worked from 2016 to 2018

Filipe Morais

Electrical and Computer Engineer

Worked from 2016 to 2017

Hugo Rocha

Line inspection operator

Worked form 2012 to 2015.

Hugo Tavares

Software and Computer Engineer 

Worked form 2012 to 2014.

Jaquilino Silva

Software Engineer and Master's student of Computer Engineering

Worked from 2011 to 2014.

Working student in degree, completed the Master with a dissertation motivated by the company.

Personal page

João Fradinho Oliveira

PhD, Computer Engineer

Worked form 2012 to 2014.

João Nunes Águas

Electronics Engineer

Worked at the company from 2009 to 2011. Hardware development, electric grid analysis.

Personal page

Jorge Vitória

MSc, Software Engineer

Worked at the company from 2009 to 2011. Main developer of PLMI 2, the post-flight inspection software.

Personal page

Luís Pimentel

Mechanical Engineer

Hardware and signal processing software. Worked at the company from 2006 to the end of 2009.

Personal page

Luís Raposo

Management and Marketing

Worked at the company from 2015 to 2016.

 

Maria Sousa

Line inspection operator

Worked at the company from the 2012 to 2013.

Personal page

Maximien Coelho

 

Maximien Coelho was Finance Director from May 2009 to April 2012 and Coordinator for the French market from 2012 to March 2017.

 

Nelson Fernandes

Electrical Engineering

Worked at the company from 2014 to 2016.

 

Nuno Pinho da Silva

PhD, Electrical and Computer Engineer

Worked at the company from 2013 to 2014.

During his work was the principal author of two publications on risk modeling in electricity networks.

Personal page

Pedro Martins

Computer Engineer

Worked at the company from 2011 to 2013.

Ricardo David

Line Inspection Operator

Worked at the company from 2016 to 2018.

 

 

Ricardo Oliveira

Electrical and Computer Engineer

Worked at the company from 2014 to 2016.

 

Rita Lopes

Electrical and Computer Engineer

Worked at the company from 2014 to 2015.

 

Sérgio Copeto

Electrical and Computer Engineer

Worked at the company from 2012 to 2015.

 

Tiago Gusmão

Electrical and Software Engineer

Worked at the company from 2009 to 2016.

 

Vítor Almeida

Msc, Electronics Engineer

Worked at the company from 2012 to 2016.

 

Former interns

2018

Chung Kwok Cheong "Tommy"

from Hong Kong, China, was at Albatroz Engenharia for 2 months through IAESTE. Tommy as he was known at Albatroz Engenharia is taking his degree in Data Science and Analytics, and has been working with 3D data in forests.

David Santos

from Lisbon, Portugal, joined the Albatroz Engenharia on July 9 and was here for 9 weeks. He came to do a summer internship through IST and had as main project to merge data from LiDAR and cameras in order to create 3D textures to these models.

Francisco Barral

from Lisbon, Portugal, spent 9 weeks in a summer internship until he was finally hired by Albatroz. During his internship he worked in a meteorological station to be incorporated in a fixed-wing drone.

 

2016

Matthias Alvarenga

de, Kirchheim unter Teck, Alemanha, realizou um estágio currícular com a duração de 5 meses (Novembro de 2015 a Março 2016), na Albatroz Engenharia. O estágio consistiu em modificar o Flight Simulator 'FlightGear' (open source), com o objectivo de utilizar o sistema como uma ferramenta de simulação para exposições relacionadas com inspecção linhas eléctricas, demonstrando assim o nosso trabalho num ambiente virtual.

2016

Matthias Alvarenga

from, Kirchheim unter Teck, Germany, did an internship at Albatroz Engenharia from the beginning of November 2015 till the end of March 2016. The task of his internship was to modify the open source flight simulator 'FlightGear', so that the system can be used as a simulation tool at exhibitions to demonstrate our work in a virtual environment.

 2014

Cong Peng

from Shantou, China, did an internship at Albatroz Engenharia from  August  to February, organised by the AIESEC. During the internship Cong conducted online researches of international market, helped in the characterisation of economic markets and also to draw up its reports.

 2012

Sergi Buitrago

from Lleida, Spain, took a Summer Internship in 2012 organized by IAESTE. We worked as a programmer to simulate sensors that are embarked on a virtual aircraft flying inside a flight simulator tool and also on the representation of power lines within the same simulator.

Raúl Sanchez

from Valencia, Spain worked as a software engineer in the modifications of an open source flight simulator aimed at simulating Power Line Maintenance Inspections with manned helicopters. His presence was organised by the Leonardo da Vinci program from May to July 2012.

Cléa Gil-Pereira

from Nîmes, France, is studying internation marketing at Lycée Albert Camus. As a part of her curriculum she took an internship at Albatroz Engineering from May to June 2012 to prepare the participation of the company at the Technical Exhibition of CIGRÉ2012.

Baljeet Yadav

came from Haryana, India to work on the automatic classificatiopn of vegetation growth matching survey data from the Instituto Geográfico Português (the national survey and land use services) with findings from LiDAR inspections. He presented his study plan to Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa and worked at Albatroz from May to July 2012

 2010

Wei Liu

from Lappeenranta, Finland, worked on automatic feature extraction from video during the Summer of 2010.

Pedro Martins

from Lisbon, Portugal, developed audit and quality control software for power line maintenance inspection during the Summer of 2010. Later, he joined the company.

 2008

Nenad Filipovic

from Zagreb, Croatia, worked on Geographical handling of structured data during the Summer of 2008.

 2006

Sergio Deras Arreola

from Durango, Mexico, worked on Web contents and helicopter real-time interface during the Summer of 2006.

Vedran Taslaman

from Leeds, United Kingdom, worked on 3D mechanical drawing during the Spring of 2006.

 2017

Adriano Brum

from Madeira, Portugal.  Student of the integrated Master's Degree in Aeronautical Engineering, did a summer internship with a duration of 1 month (August 16 to September 15). His internship consisted in the feasibility study for the operation of FLARM systems for UAV and preparation of a "Rules of the Air" manual for the UAV meeting with FLARM

Marta Marques

fom Lisbon, Portugal, did a summer internship in Aerospace Engineering with a duration of 2 months (17 July to 18 August). Her internship consisted in the feasibility study for the operation of FLARM systems for UAV and preparation of a "Rules of the Air" manual for the UAV meeting with FLARM.

Monika Jagodsinka

from Kutno, Poland, did a 2 month software internship organised by IAESTE. The internship was divided into two parts: Extend a LiDAR emulator implemented upon FlightGear open source project additional functionalities such as 360º field of view and more than one scanning layer; Coding a real-time visualizer for 3D LiDAR data in Javascript using WebGL.

Guilherme Rolo

from Lisbon, Portugal, did 1 month internship in image processing. The internship was within the scope of a Professional Integration subject, so the main goal was to develop some professional experience with real life applications.

 2015

Matthew Papke

from, Minneapolis, North American, did a summer internship in software from June till the middle of August. Matthew's internship consisted in creating a software tool using algorithms to map the road, and then the volume on sand covering it with limited measuring points.

Sandra López 

from, Basque Country, Spain, did a three month internship under the Eramus+ programme, coordinated by the Euroyouth Portugal. Throughout the internship, Sandra worked in international markets research, specifically analysing the South American market.

Javier Ramos

from, Andalusia, Spain was with Albatroz Engenharia since the beginning of May to mid June. His internship was coordinated by the Euroyouth Portugal, under the Eramus+ programme. During these almost three months, Javier redesigned our Ground Maintenance Inspection (GMI), making it more ergonomic and adjusting it to use a new higher-end LiDAR.

 2013

Pedro Artiga

from são paulo, Brazil, did an Internship organised by The International Association for the Exchange of Students for Technical Experience (IAESTE). Pedro worked within the Grid Intelligence & Optimisation (GIO) framework focussed on the development of an intelligent interface to extend Geographic Information Systems (GIS) with statistical signal processing tools, in order to create a data visualisation application that allows to quantitatively relate the power lines to the environment where they operate

Clara Paiva e Filipe Silva

from Lisbon, Portugal, did a short but intense internship. By using the Google web toolkit in the core of their work, both developed the architecture for a new real time interface, common to all Albatroz Engineering products.

Gianluca Masotta

from, Benevento, Italy. The internship took place during the Jun to August, which involved analysis and transfer of spatial data, related to land use in easements of the Portuguese transmission system operator (TSO).

Olatz Muruaga Garcia

from Bilbao, Spain, did an internship at Albatroz Engenharia from May to July 2013. The internship was coordinated by the organisation Euroyouth Portugal under the Leonardo da Vinci's program. During the internship Olatz worked on international market research, by analysing the South American markets to look for business opportunities.

 2011

Pedro Mendes

from Lisbon, Portugal, worked on severity analysis of power line maintenance inspection findings during the Summer of 2011.

Lukasz Strobin

from Lodz, Poland, worked on hardware and software development for 2D and 3D modelling during the Summer and Autumn of 2011.

Marco Arede

from Lisbon, Portugal, worked on mobile interfaces for tablets during the Summer of 2011.

Madalena Trindade

from Lisbon, Portugal, worked on power line sag detection during July of 2011.

Rocío Merchán

from Córdoba, Spain, worked on international marketing during the Summer of 2011

Alejandre Pariente Ceballos

from Zaragoza, Spain, worked on power control for helicopter sensors during May 2011.

 2009

Ana Rita Carvalho

from Paço d'Arcos, Portugal, made 3D models using the hardware and tools created by the company with graphic computing software.

 2007

Daniel Sparing

from Budapest, Hungary, worked on bitmap data for geo-referenced databases during the Summer of 2007. He keeps a personal site.